Front | UA/TC 146

Printer-friendly version

Technical committee “Materials, technologies, equipment and structures in oil and gas industry” was established by the order # 252 on 23.04.2002 of Derzhspozhivstandart of Ukraine with the agreement of Ministry of Fuel and Energy of Ukraine. It is attached to Ivano-Frankivsk National Technical University of Oil  and Gas (IFNTUOG) – the only higher educational institution in Ukraine of oil and gas profile.

The scope of TC 146 includes development, review and approval of national standards, participation in activities of related international and regional organizations and formation of Ukraine’s position concerning regulations developed by these organizations by the following objects of standardization.

Since its establishment TC 146 takes an increasingly active part in the foundation of standardization in oil and gas industry. In particular, the following national standards were developed:

- DSTU 4615:2006 Transfer pipelines. Steel welded details for PN up to10 MPa. General requirements;

- DSTU 4616:2006 Transfer pipelines. Steel welded details for PN up to10 MPa. Types, main parameters and dimensions.

- DSTU EN ISO 13535:2008 Petroleum and natural gas industries -- Drilling and production equipment -- Hoisting equipment (EN ISO 13535:2000 IDT);

- DSTU EN ISO 13534:2010 Petroleum and natural gas industries -- Drilling and production equipment -- Inspection, maintenance, repair and remanufacture of hoisting equipment (EN ISO 13534:2000 IDT);

- DSTU EN ISO 13628-3:2012 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 3: Through flowline (TFL) systems (ISO 13628-3:2000  IDT).

 In addition, TC 146 specialists were involved to the development of some regulations of lower level, main of which are:

 - CSU 60.3-20077720-023:2007 Transfer pipelines. Explosion safe equipment. Procedures and rules for maintenance and repair;

 - CSU 60.3-31570412-027:2007 Transfer pipelines. Oil pumping stations, marine terminals, inspection, expert inspection of process equipment and piping. Methods and techniques;

 - CSU 60.3-31570412-028:2007 Transfer pipelines. Oil pumping stations, extension of the operating manual of process equipment and piping on the results of technical reviews, expert inspection. Policies and procedures;

 - CSU 11.2-20077720-026:2007 Oil and gas wells. Calculating of tubing;

 - CSU 60.3-30019801-067:2009 Transfer pipelines. Assessment of the actual technical state of potential stations. Methods and techniques.

For TC 146 review and approval about 40 legal documents of various levels were sent, developed by such institutions as NDPIASUtransgaz, SE “Naukanaftogaz”, “Naftogaz of Ukraine”, UkrRSIgas, Rescue Service “LIKVO” TC 78" Non-Destructive Testing and Evaluation”, SPE “Zond” SE “Sumystandartmetrolohiya”, SE RSI “System”, “Institute of Strength problems” n.a. G.S. Pysarenko, NAS of Ukraine, Institute of Electrodynamics of NAS of Ukraine, JSC "Institute of Oil Transportation" and several others.

 Additionally, in order to coordinate production, scientific and other activities of products market participants, processes and services in oil and gas industry for solution of common problems of standardization in oil and gas sector of Ukraine 2007-11-15 TC 146 jointly with IFNTUOG created the Association "Naftohazstandart, which includes major companies and institutions of oil and gas sector.

 Since 2007, TC 146 takes an active part in harmonization of Ukrainian National Standards in accordance with international and European ones:

1) DSTU EN ISO 13625:2008 Petroleum and natural gas industries -- Drilling and production equipment -- Marine drilling riser couplings (EN ISO 13625:2002, IDT);

2) DSTU EN ISO 13703:2008 Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (EN ISO 13703:2000, IDT);

3) DSTU EN ISO 15136-1:2008 Downhole equipment for petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 1: Pumps (EN ISO 15136-1:2001, IDT).

4) prDSTU EN 10301 Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas (EN 10301:2003, IDT);

5) prDSTU EN ISO 10427-1 Petroleum and natural gas industry. – Equipment for well cementing – Part 1: Casing bow-spring centralizers (EN ISO 10427-1:2001, IDT);

6) prDSTU EN ISO 15761 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (EN ISO 15761:2002, IDT).

7) prDSTU ISO 10424-1:2004 Petroleum and natural gas industries -- Rotary drilling equipment -- Part 1: Rotary drill stem elements;

8) prDSTU ISO 14310:2001 Petroleum and natural gas industries -- Downhole equipment -- Packers and bridge plugs

9) prDSTU ISO 10405:2000 Petroleum and natural gas industries -- Care and use of casing and tubing;

10) prDSTU ISO 10417:2004 Petroleum and natural gas industries -- Subsurface safety valve systems -- Design, installation, operation and redress.

11 prDSTU ISO 13628-1 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 1: General requirements and recommendations (ISO 13628-1:2005, IDT).

12) prDSTU ISO 13628-2 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 2: Unbonded flexible pipe systems for subsea and marine applications (ISO 13628-2:2000, IDT).

13) prDSTU ISO 13628-3 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 3: Through flowline (TFL) systems (ISO 13628-3:2000, IDT).

14) prDSTU ISO 13628-8:2002 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems;

15 prDSTU ISO 13628-9:2000 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 9: Remotely Operated Tool (ROT) intervention systems;

16) prDSTU ISO 13628-10:2005 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 10: Specification for bonded flexible pipe.

Additionally, for implementing of the State Standardization Program for years 2006-2010 and for the order of the Ministry of Fuel and Energy of Ukraine in 2008 TC 146 worked on the analysis of existing national standards in the field of oil and gas industry and their conformity with EU requirements. 

 

 

 


 

 

 

 

 

 

Technical committee “Materials, technologies, equipment and structures in oil and gas industry” was established by the order # 252 on 23.04.2002 of Derzhspozhivstandart of Ukraine with the agreement of Ministry of Fuel and Energy of Ukraine. It is attached to Ivano-Frankivsk National Technical University of Oil  and Gas (IFNTUOG) – the only higher educational institution in Ukraine of oil and gas profile.

The scope of TC 146 includes development, review and approval of national standards, participation in activities of related international and regional organizations and formation of Ukraine’s position concerning regulations developed by these organizations by the following objects of standardization." data-share-imageurl="">